Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported by lifting device. Failure to follow
this warning may cause injury or death to personnel.
Rear panel assembly weighs 220 lb (100 kg).
1. Attach sling and lifting device to rear panel assembly (1).
2. Use lifting device to position rear panel assembly (1) on two rear panel assembly attach bars (9).
3. Position ground strap (8) and secure rear panel assembly (1) to two rear panel assembly attach bars (9)
with four washers (7), lockwashers (6), and screws (5). Do not tighten screws at this time.
4. Install locknut (4), two washers (3), and one screw (2) to rear panel assembly (1). Do not tighten locknut
at this time.