Ensure that adequate clearance exists between the draglink adjustment clamp and the Mine
Blast Shield (P/N 111458) through the full steering range. Rotate the clamp as necessary to
gain adequate clearance.
d. Re-install the Tire Carrier and Spare Tire.
1. Position the Tire Carrier (see Item 1 in Figure 34) on the fender (2).
2. Install two screws (3), two lockwashers (4), and two nuts (5).
3. Install two screws (6), two lockwashers (7), and two nuts (8) on the tire carrier (1)
and the fender (2) as shown.
4. Torque the screws (3) to 80 ft-lb.