LOWER BRUSH GUARD REPLACEMENT - CONTINUED
Remove six locknuts (1), washers (2), bolts (3), and washers (4) from front edge of both side blast shields (9). Discard
Remove eight locknuts (5), washers (6), bolts (7), and washers (8) from front edge of both side blast shields (9). Discard
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
N OT E
Lower brush guard weighs 219 lb (99 kg).
Attach two lifting links, sling, and lifting device to top edge of lower brush guard (13).