h. Steering System adjustments
If you change from Michelin XL or Goodyear AT2A tires, NSN 2610-01-126-1576, to Michelin
You can have your Direct Support shop adjust your steering or follow the instructions in steps (13)
Axle stop bolts should be turned in to prevent interference with relief plunger adjustment
Turning plunger counter-clockwise will decrease gap between equalizer beam and tire turning
clockwise will increase gap.
Each time relief plunger is adjusted, wheels must be turned toward center and then back to stops to
obtain full steering relief. Plunger on bottom of steering gear regulates right turns and plunger on top
regulates left turns.